Ramirez Sewing Machine Repair

I repair & maintain sewing machines in Durham, NC! My pricing is affordable and transparent, and is available below. Any cost incurred for diagnosis or standard maintenance will go towards your total cost if you end up having a timing issue.Unsure what your issue is? Reach out and we'll figure it out.

Pricing

Diagnostics & Troubleshooting
$20.00
Annual Maintenance
$35.00
Vintage Service & Repair
machines made before 1979
$75.00
Modern Machine Service & Repair
1980-Present
$60.00
Embroidery Machine Service & Repair
1980-Present
$100.00Sliding Scale
If you are in need of repair and cannot afford the rates above, let me know and we'll work something out <3

Links to Manuals

Coming Soon

Troubleshooting Common Issues

Basic Troubleshooting Checklist

The vast majority of issues can be resolved by trying the following:
1. Re-thread your machine completely, both your upper and lower threads. Give both a tug with your presser foot raised (this disengages the tension disks) to ensure the threads aren't catching somewhere.
2. Check your needle, has it become dull?
3. Check your tension, between 3-4 is usually enough for most projects.
4. Are you using the right foot for the stitch you're trying to use?
5. Check your bobbin for damage or burrs. Re-thread that as well if you notice any knots or irregularities.
6. While you're in there, does it look like its time for a cleaning around your bobbin area? Lint build up around the feed dogs or bobbin area can cause strange behavior.

Stuck Needle

Does is feel like your needle won't move any further? Remove any fabric you may have been using. Avoid turning the handwheel away from you (if possible, sometimes a jam can be very gnarly). Take a close look and observe where it seems like the pressure is being created by turning the handwheel towards you.1. Does it seem like it is being caused by the thread itself? If so, reducing your tension or lifting your presser foot may help. I suggest re-threading.
2. Is it hitting your sewing foot? Double check that you are using the right foot for the stitch you have selected on your machine, check your manual if you aren't sure.
3. Is it hitting your needle plate? Your needle plate may be damaged or your needle position needs to be adjusted. I recommend getting it serviced if there isn't any damage to the needle plate.
4. On newer top-loading machines check your bobbin case for damage. If it is damaged replace it, plastic bobbin cases for most machines are typically cheap to purchase ($9-$30).